Technical reply within 24 hoursISO 9001:2015 · ATEX · CE

Quality and certifications

Quality and certifications of our pumps

We have designed and built pumps in Bologna since 1955. Our quality system has been certified ISO 9001:2015 by SGS since 2004, the pumps are CE marked and available in ATEX versions. Certificates are available on request.

  • ISO 9001:2015SGS certified since 2004

    Design, manufacture and after-sales service of external gear pumps.

  • ATEXZones 1, 2, 21, 22 · T1–T4

    Technical file held at TÜV. ATEX pumps for explosive atmospheres on request.

  • CEMachinery Directive 2006/42/EC

    CE marking on every pump, with technical documentation.

  • 1955In-house design

    Every component designed and machined in-house, with long-standing collaboration with the Machines Institute of the University of Bologna.

Certificates available on request.

ISO 9001:2015, SGS certified since 2004

The quality management system covers design, manufacture and after-sales service of external gear pumps. The certification is issued by SGS and has been renewed since 2004.

In practice: documented processes, in-house machined and inspected components, traceability and one technical contact from enquiry to delivery. The certificate is available on request: contact us.

ATEX: zones 1, 2, 21, 22 and classes T1–T4

We build pumps for potentially explosive atmospheres, with the technical file held at TÜV. Zones 1, 2, 21 and 22 and temperature classes T1, T2, T3 and T4 are available.

Zones 0 and 20 and classes T5 and T6 are not available. When you ask for an ATEX pump tell us the zone, temperature class and fluid temperature. More on the ATEX pumps page.

CE marking and Machinery Directive 2006/42/EC

Every pump complies with the Machinery Directive 2006/42/EC and ships with CE marking and technical documentation. ATEX versions include the specific declaration of conformity.

In-house design since 1955

We design and machine every pump component in-house, building on a long-standing collaboration with the Machines Institute of the University of Bologna on gear and pumping chamber sizing.

Bodies are in cast iron or AISI 316 stainless steel. If the model you need is not in the catalogue we build the pump to order: see the series and selector or replace your pump.

Ask for the certificates or a technical proposal: we reply within 24 hours.

Describe the fluid, we will size the pump

Fluid type, temperature, flow rate and pressure: with these data our Bologna factory replies within 24 hours with the recommended model, drive and heating system.

Message us on WhatsApp Request a quote

Technical reply within 24 hours · ISO 9001:2015 certified · ATEX available

WhatsApp Quote