Technical reply within 24 hoursISO 9001:2015 · ATEX · CE

Explosive atmospheres

ATEX gear pumps

Our ATEX gear pumps are self-priming external gear pumps for explosive atmospheres in zones 1, 2, 21 and 22, with temperature classes T1 to T4. The technical file is filed at TÜV. We build them in Bologna for terminals, refineries, paint plants and solvent lines. Zones 0 and 20 and classes T5 and T6 are not available.

Gas zones
1 and 2
Dust zones
21 and 22
Temperature classes
T1 to T4
Not available
Zones 0 and 20, classes T5 and T6

When you need an ATEX pump

An ATEX pump is required when the fluid or the area can create an explosive atmosphere: flammable liquids, solvents, fumes or dust. Typical cases are fuel and oil terminals, refineries, paint and ink lines and solvent transfer.

You must tell us the zone and the temperature class of the area. They decide the construction of the pump and of the motor. Our gear pumps are self-priming and give a steady flow, and the same ATEX approach applies across the NAV, ZV and CR series.

What our ATEX gear pumps cover

  • Gas zones 1 and 2.
  • Dust zones 21 and 22.
  • Temperature classes T1, T2, T3 and T4.
  • Technical file archived at TÜV.

We do not offer zones 0 and 20, and we do not offer classes T5 and T6. If your area needs them, we tell you at once and do not quote a pump that would not comply. Series available include the NAV for high flow, the ZV for small flows and the CR for heated products.

The pump and its drive are chosen together, so the zone applies to the whole unit.

Typical ATEX applications

You can use these pumps in:

CR, NAV and ZV are reversible, so you can empty a line by inverting the rotation. For the working principle read how gear pumps work.

In every case the choice starts from the zone declared by the plant safety officer.

Data we need for an ATEX pump

In addition to the usual sizing data, give us:

  • the zone, 1, 2, 21 or 22, and the temperature class;
  • fluid, viscosity and working temperature;
  • required flow and discharge pressure;
  • suction distance and height;
  • continuous duty or intermittent;
  • 50 or 60 Hz power supply.

The flow is only partly affected by discharge pressure, so we size the pump on the real duty point. See also viscous fluid pumps.

If the zone classification is not ready, send the fluid data first and we prepare a preliminary proposal.

Ask for an ATEX pump quote

Tell us the fluid, the zone and the temperature class of your area. We confirm whether the pump can be supplied and which series fits. Please use the contact form or message us on WhatsApp, and we reply within 24 hours.

A useful first message names the fluid, the working temperature, the viscosity if you know it, the flow you need, the discharge pressure and the length of the suction line. A photo of the existing pump or of its plate also helps. We read everything and answer with a first technical proposal.

Frequently asked questions

Which ATEX zones do your gear pumps cover?

Zones 1 and 2 for gas, and zones 21 and 22 for dust. Zones 0 and 20 are not available, and neither are temperature classes T5 and T6, so ask us early, before you plan the installation.

Which temperature classes can you supply?

Classes T1 to T4. Classes T5 and T6 are not available, so if the fluid or the area needs them we tell you in advance rather than offering a pump that does not comply.

Where is the ATEX technical file kept?

The technical file is archived at TÜV. Send us your zone and class and we confirm that the pump can be supplied for your plant.

Which fluids are typical for ATEX pumps?

Fuel oil, hydrocarbons, paints, inks and solvents at terminals, refineries and paint plants. Tell us the viscosity and temperature so that we choose the series.

Are the pumps certified?

Yes. Our quality system has been ISO 9001:2015 certified by SGS since 2004 and the pumps are CE marked under the Machinery Directive 2006/42/EC. Certificates are available on request.

Are ATEX pumps available?

Yes, for zones 1, 2, 21 and 22 and temperature classes T1–T4, with a technical file held at TÜV. Zones 0 and 20 and classes T5 and T6 are not available. Tell us zone and class in the form.

How quickly do you reply?

We reply within 24 hours with a technical proposal: model, drive and heating system. To speed things up, give us fluid, temperature, flow rate and discharge pressure.

All frequently asked questions →

Describe the fluid, we will size the pump

Fluid type, temperature, flow rate and pressure: with these data our Bologna factory replies within 24 hours with the recommended model, drive and heating system.

Message us on WhatsApp Request a quote

Technical reply within 24 hours · ISO 9001:2015 certified · ATEX available

WhatsApp Quote